50
ETSI EN 301 839
GUIDELINES AND MANUFACTURER’S DECLARATION – ELECTROMAGNETIC
EMMISSIONS OF THE OPTIMIZER SMART MINI IPG PURSUANT TO:
ETSI EN 301 839 V2.1.1 - Ultra Low Power Active Medical Implants (ULP-AMI) and
associated Peripherals (ULP-AMI-P) operating in the frequency range 402 MHz to
405 MHz; Harmonised Standard covering the essential requirements of article 3.2
of the Directive 2014/53/EU
The OPTIMIZER Smart Mini Implantable Pulse Generator, part of the OPTIMIZER Smart
Mini System is intended for use in an electromagnetic environment
as specified below.
The patient implanted with the OPTIMIZER Smart Mini Implantable Pulse Generator must
ensure that it is used within the specified environment.
Emissions Test
Compliance
Electromagnetic
environment -
guidelines
Frequency Error
Complie
s with clause 5.3.1
The OPTIMIZER Smart
Mini IPG must emit
electromagnetic energy in
order to perform its
intended function when
communicating with the
Intelio Programmer or the
Vesta
Charger. Nearby
electronic equipment may
be affected.
Occupied Bandwidt
h
Complies with clause 5.3.2
Power Output
Complies with clause 5.3.3
Transmitter Spurious
Emissions (30 MHz to
6
GHz)
Complies with clause 5.3.4
Frequency Stability Under
Low Voltage Conditions
Complies with clause 5.3.5
Spurious Radiation of
Receivers
Complies with clause 5.3.6
Summary of Contents for AIM HIGHer OPTIMIZER
Page 6: ...ii Implanted Medical Device Identification Card back ...
Page 62: ......
Page 65: ...NOTES ...
Page 66: ......
