Impulse Dynamics AIM HIGHer OPTIMIZER, Patient Manual

Page: 31 / 66

25
6.9 Vesta Charger Placement When Not Being
Used for Device Charging
Whenever your Vesta Charger
is not being used to charge your
OPTIMIZE
R Smart Mini IPG, it should be placed in an area
frequented by you (
e.g.,
bedside table in
your
bedroom),
connected to its AC Adapter, and the AC Adapter plugged into the
wall outlet. This will keep the battery of
your Vesta Charger fully
charged as well as ensure regular communications between
your
OPTIMIZER Smart Mini IPG and
your Vesta Charger.
Note: Keeping your Vesta
Charger continuously connected to its
AC Adapter while it is plugged into the wall outlet will not in any
way harm or weaken the battery
in your Charger.
6.10 Frequency of Charging Sessions
The o
ptimal performance of the rechargeable battery
in your
OPTIMIZER Smart Mini
IPG
can only
be ensured if the battery is
fully recharged
every
week. It is not
important
which day or what
time you choose to charge your OPTIMIZER Smart Mini
IPG
,
but
it is recommended that you do
not let more than seven
days
pass
between charge sessions.
If your Vesta Charger
is not used to perform a charging session
on your OPTIMIZER
Smart Mini IPG within the time period set b
y
your
doctor
, you may see the Long Time Without Charging
IPG
alert screen
displayed by your
Vesta Charger
, indicated by an
animated
image of the Vesta
’s Charging Wand being placed over
a patient’s implanted device.
See Figure 22 .
Figure 22: Long Time Without Charging IPG Alert Screen
If
you see this message displayed by your
Vesta Charger,
proceed to
use your Vesta Charger to charge your OPTIMIZER
Smart Mini IPG
. If your attempt to charge your OPTIMIZER Smart
Mini IPG with your
Vesta Charger is unsuccessful, contact your
doctor as soon as possible
.