Impulse Dynamics AIM HIGHer OPTIMIZER Patient Manual Download Page 36

Page: 36 / 66

•

If the Call Doctor

Alert Code “A32”

is displayed, it means

that you are attempting to use your Vesta Charger on an

unpaired

device

. If this c

ode

is displayed by

your Vesta

Charger,

perform the following steps:

1. Verify that the Vesta Charger you are using is the

one that was assigned to you

and then restart the

charging process.

2. If this

code is still displayed after the charging

wand has been

aced over

your

implanted

OPTIMIZER Smart Mini IPG and the charging

process has been restarted

, please contact your

doctor

6.13 Cleaning

Warning:

Always unplug the AC Adapter

from your Vesta

Charger prior to cleaning.

The exterior surface of your Vesta Charger

should

only

cleaned with disinfectant wipes as needed

Caution:

DO NOT

use solvents or cleaning cloths impregnated

with chemical cleaning agents.

Warning:

DO NOT

attempt to clean the electrical connector of

your Vesta Charger.

Warning:

DO NOT

submerge a

ny part of your Vesta Charger in

water

. Damage to the unit may result.

6.14 Maintenance

Your Vesta Charger

does not contain any user

serviceable parts.

If your Vesta Charger is not operational, please contact your

doctor

to obtain a replacement charger.

Warning:

No modification of this equipment is allowed.

The battery inside

your Vesta Charger

is expected to have a

service life of 5 years. If your Vesta Charger

is unable to fully

charge your OPTIMIZER Smart Mini

IPG

after the C

harger’s

internal

battery has been

fully charged,

please contact the 24-hour

Support Hotline (866

-312-5370

) to obtain a replacement charger.

Summary of Contents for AIM HIGHer OPTIMIZER



































































Search results

Summary of Contents for AIM HIGHer OPTIMIZER

Reviews:

Related manuals for AIM HIGHer OPTIMIZER

Brands by name

Popular brands

Impulse Dynamics AIM HIGHer OPTIMIZER, Patient Manual

Search results

Summary of Contents for AIM HIGHer OPTIMIZER

Reviews:

Related manuals for AIM HIGHer OPTIMIZER

Brands by name

Popular brands