Impulse Dynamics AIM HIGHer OPTIMIZER Patient Manual Download Page 16

Page: 16 / 66

6.0 VESTA CHARGER

6.1

System Components

Your Vesta Charger System consists of the

following components:

Figure 3: Vesta Charger System Components

•

Vesta Charger

(with attached charging wand

and

charging wand

cable clip)

–

used to charge

your

OPTIMIZER Smart Mini IPG.

•

AC Adapter

–

used to charge the internal battery of

your

Vesta Charger.

•

E.U. / U.S. Plug Adapters

–

plug adapters for

the AC

Adapter, allowing the AC Adapter

to be connected to wall

outlets in the E.U.

and

the U.S.

•

Carrying Case

–

used to store and

transport your Vesta

Charger System.

Carrying Case

AC Adapter with
attached U.S.
Plug Adapter

Charging
Wand

E.U. Plug
Adapter

Vesta
Charger

Charging Wand
Cable Clip

Summary of Contents for AIM HIGHer OPTIMIZER



































































Search results

Summary of Contents for AIM HIGHer OPTIMIZER

Reviews:

Related manuals for AIM HIGHer OPTIMIZER

Brands by name

Popular brands

Impulse Dynamics AIM HIGHer OPTIMIZER, Patient Manual

Search results

Summary of Contents for AIM HIGHer OPTIMIZER

Reviews:

Related manuals for AIM HIGHer OPTIMIZER

Brands by name

Popular brands