Implen NanoPhotometer C40 User Manual Download Page 86

Page: 86 / 176

NanoPhotometer

N120/

NP80/N60/N50/C40

User Manual Version 4.3.1

For NanoVolume application with submicroliter cell (C40 only):

Select Lid depending on your sample concentration (for concentration ranges of different
lids see page 52 Submicroliter Cell Measurements Basics).
Required sample volume for each lid is shown.

Note:

A new Blank is recommended when changing the dilution lid.

5. Default values for the baseline correction are depending on selected protein assay type and

instrument version:
BCA default value 750 nm (N50 off)
Biuret default off
Bradford default value 750 nm (N50: 350 nm)
Lowry default value 405 nm

Note

: It is recommended to use the default baseline for each assay.

6. Select curve fit type: Options are linear regression, zero regression (forces the straight line

through the origin) and 2

order regression

Summary of Contents for NanoPhotometer C40

















































































































































































Search results

Summary of Contents for NanoPhotometer C40

Reviews:

Implen NanoPhotometer C40, User Manual, Page: 86 / 176

Search results

Summary of Contents for NanoPhotometer C40

Reviews: