Implen NanoPhotometer C40 User Manual Download Page 133

Page: 133 / 176

NanoPhotometer

N120/

NP80/N60/N50/C40

User Manual Version 4.3.1

133

RINTER

Selecting Printer in the Preferences menu opens a window to the right of the preferences
menu with the following options: Network Printer and Report Configuration.

ETWORK

RINTER

It is possible to print via network (Ethernet) or Airprint

/ IPP compatible (supporting PDF

format) printers in the network.

Note

: IPP version 2.2 is required and some printer configuration settings might need to be

changed in order to allow communication with the NanoPhotometer

Enter the IP of the network printer to the input window.

Note

: For printing on network printer the NanoPhotometer

needs to be connected to the

network either via Ethernet (LAN cable) or WiFi network.

Note

: If a printer is directly connected to the NanoPhotometer

via USB, this printer will have

the highest priority and will be the printer used by default when selecting Print on
NanoPhotometer

. In order to print utilizing a printer on the network, please disconnect the

installed USB printer.

Summary of Contents for NanoPhotometer C40

















































































































































































Search results

Summary of Contents for NanoPhotometer C40

Reviews:

Implen NanoPhotometer C40, User Manual, Page: 133 / 176

Search results

Summary of Contents for NanoPhotometer C40

Reviews: