Implen NanoPhotometer C40 User Manual Download Page 125

Page: 125 / 176

NanoPhotometer

N120/

NP80/N60/N50/C40

User Manual Version 4.3.1

125

Note

: Do not change the date and time at the same time as the time zone. Make sure that

the UTC time is set correctly before changing the time zone.

ISPLAY

Brightness: adjustment of the built-in screen brightness

Screensaver: Option to switch the screensaver video on and off. With Preview Screensaver
the screensaver can be started immediately.

Note:

Screensaver activation will influence the time for battery operation. To prolong battery

operation, switch the screensaver off.

Note

: The screensaver option is not available when the CFR21 software is enabled.

BOUT

In About the following information of the NanoPhotometer

are shown: NanoPhotometer

Version, Serial Number, Ethernet IP Address, WiFi IP Address, Hardware Version, Firmware
Version, Time & Date of Initialization Test and Status of Initialization.

TORAGE

Shows the total storage capacity and the free space of the internal NanoPhotometer

storage.

ANGUAGE

In language settings, the user has the option to change the language of the
NanoPhotometer

software. The following languages are available: English, Chinese,

French, German, Japanese, Portuguese, Russian or Spanish. The language is changed for
the user interface, printouts and saved Excel and PDF files.

Summary of Contents for NanoPhotometer C40

















































































































































































Search results

Summary of Contents for NanoPhotometer C40

Reviews:

Implen NanoPhotometer C40, User Manual, Page: 125 / 176

Search results

Summary of Contents for NanoPhotometer C40

Reviews: