LYNX Manual RA02
3.6.4
Load From User (
‘lfu’
)
The
‘lfu’
command instructs the camera to load its workspace from one of
the two user spaces. All current workspace settings will be replaced with the
contents of the selected user space.
Syntax:
lfu <1|2>
Parameter #1:
1
User #1 configuration space.
2
User #2 configuration space.
Example:
lfu 2
Camera loads workspace from user #2
space.
3.6.5
Save To Factory (
‘stf’
)
The
‘stf’
command instructs the camera to save all of the current
workspace settings into the factory space.
Syntax:
stf
Note:
This command can only be executed in supervisor mode. It is
intended for use by factory personnel only.
3.6.6
Save To User (
‘stu’
)
The
‘stu’
command instructs the camera to save all of the current
workspace settings into the selected user space.
Syntax:
stu <1|2>
Parameter #1:
1
User #1 configuration space.
2
User #2 configuration space.
Example:
stu 1
Camera saves workspace into user #1
space.
www.imperx.com
94
of
154
5/6/2005
