LYNX Manual RA02
3.8.16.3 Set Trigger Duration (
‘std’
)
The
‘std’
command sets the number of frames to be transmitted after
a trigger event occurs.
Syntax:
std <i>
Parameter:
i
The number of frames to be transmitted
after the trigger. A value between 250
and 255 indicates that the camera should
free run after the trigger.
Range:
i
min=1,
max=255
Example:
std 6
Sets the number for triggered frame to 6.
3.8.16.4 Get Trigger Duration (
‘gtd’
)
The
‘gtd’
command returns the current trigger duration setting.
Syntax:
gtd
Response:
i
Example:
gtd
User enters command.
6
Camera responds with current setting.
3.8.16.5 Set CC Integration (
‘sci’
)
The
‘sci’
command enables the CC integration mode when the
trigger is set to CC. In this mode, the pulse duration of the CC1 signal
determines the exposure time for the first frame after trigger.
Syntax:
sci <on|off>
Parameter:
on
Enables CC integration mode.
off
Disables CC integration mode.
Example:
sci on
Enables CC integration.
3.8.16.6 Get CC Integration (
‘gci’
)
The
‘gci’
command returns the current CC integration setting.
Syntax:
gci
Response:
on|off
Example:
gci
User enters command.
on
Camera responds with current setting.
www.imperx.com
113
of
154
5/6/2005
