LYNX Manual RA02
3.8.17 Negative Image mode
3.8.17.1 Set Negative Image (
‘sni’
)
The
‘sni’
command instructs the camera to perform image inversion.
During image inversion, the camera will perform a one’s compliment
on all pixels before delivering them to the Camera Link interface
resulting in a negative image being displayed. This mode is useful if
the camera is capturing an image from photographic negatives or
micro-film.
Syntax:
sni <on|off>
Parameter:
on
Enables negative image processing.
off
Disables negative image processing.
Example:
sni on
Enables image inversion.
3.8.17.2 Get Negative Image (
‘gni’
)
The
‘gni’
command returns the current negative image setting.
Syntax:
gni
Response:
on|off
Example:
gni
User enters command.
on
Camera responds with current setting.
www.imperx.com
116
of
154
5/6/2005
