LYNX Manual RA02
3.8.15 Image Reversal mode
3.8.15.1 Set Image Reversal (
‘sir’
)
The
‘sir’
command instructs the camera to perform image reversal.
During image reversal the camera will deliver pixels, to the Camera
Link interface, in the reverse order from which they were received by
the CCD sensor resulting in a mirror image being displayed. This
mode is useful if the camera is capturing an image that is being
reflected from a mirror.
Syntax:
sir <on|off>
Parameter:
on
Enables image reversal.
off
Disables
image
reversal.
Example:
sir on
Enables image reversal.
Notes:
This feature can be used in either single or dual tap
modes. It can also be used in conjunction with
horizontal binning or horizontal window.
3.8.15.2 Get Image Reversal (
‘gir’
)
The
‘gir’
command returns the current image reversal setting.
Syntax:
gtm
Response:
on|off
Example:
gir
User enters command.
on
Camera responds with current setting.
www.imperx.com
111
of
154
5/6/2005
