IMO i3C Lite, User Manual

Page: 138 / 167

Page | 138
15.10 Analog Output Configuration
The following figure illustrates the
Analog Output Configuration dialog. [ Controller
→
(Select Series
& Device Type)
→
Local I/O
→
Config
→
Module Setup
→
Analog Output Configuration}
Figure 15.13 – Analog Output Configuration Dialog
The
Output value on Stop group box contains items that allow the user to specify how the analog
output channels behave when the controller is stopped. The outputs can either hold their value or
default to a value when the controller is stopped.
The
Output Mode group box allows the user to select the operating modes for each of the analog
outputs. The modes include 4..20mA.
The
Filter Constant provides digital filtering to all channels. Valid filter values are 0-7.