IMO i3C Lite, User Manual, Page: 131 / 167

Page | 131
Figure 15.8 – I³ Config Ethernet Settings
To configure the Ethernet settings of the i ³C Lite using i ³ Config, go to Controller
→
Hardware
Configuration . If not already done, select the correct connected controller, or use the Auto Config
button to automatically recognize a controller that is already successfully connected to I³ Config.
Below the main controller configuration, under Network Ports , find LAN1, and click on the Config
button to the right of the greyed-out ETN300.
In the LAN1 Configuration, fill in the network setup for the I³C LITE. It may be required to consult IT
personnel to determine proper settings if connection to a corporate network is required.