IMO i3C Lite, User Manual

Page: 107 / 167

Page | 107
13.6 Touch (Slip) Sensitivity
Touch slip sensitivity is preset to meet most applications; however, adjustment is available to reduce
the sensitivity for touch release. That is, once a graphical object (button) is touched and held by a
finger, the default touch
slip sensitivity allows for a slight slip of the finger on the graphical object
before the i ³C Lite assumes touch been released (equates to approximately a quarter inch of
movement with a stylus).
In some applications (such as jog buttons) where the operator is pushing a button for a period of time,
the amount of
slip while holding a button pressed may exceed the default sensitivity. To increase the
amount of tolerable slip and prevent false releases of the button, the i ³C Lite allows adjustment of the
allowable slide up to 5x the default value.
To enable the touch (slip) sensitivity, first an
i ³ data register must be allocated through the Graphics
Editor Configuration menu for Display Settings. Once a Touch Sensitivity register is assigned, that
register may be modified [range = 1(Low) to 5 (High)] to the desired slide amount. If a value outside
the valid range is entered in the touch sensitivity register, it is ignored, and the last valid value is used.