imagistics im6020 User Manual Download

Page: 337 / 525

Application Functions

im7520/im6020

8-77

plication

unctions

Chapter 8

8.14

Printing the Date/Time, Page Number or Distribution
Number on Copies (Stamp/Overlay Functions)

The date/time or page number can be added to copies at the specified loca-
tion, or a distribution number can be added when multiple copies are made.

The following Stamp/Overlay formats are available and can be combined. In
the Stamp screen, select the desired function.

The following Stamp/Overlay formats are available and can be combined.

If the HDD is not installed, “Set Numbering” function is not available.

Function

Description

Date/Time

Select a format and print the date or time on the specified pages.
(Refer to page 8-81.)

Page #

Select a format and print page numbers starting with the specified
page number. (Refer to page 8-83.)

Set Numbering

Print a four-digit distribution number to fill the background of each
set of copies. (Refer to page 8-88.)

Built-in Stamp

Print copies with one of the preset stamps, such as “URGENT” or
“IMPORTANT”. (Refer to page 8-90.)

Watermark

Print copies with one of the preset text. (Refer to page 8-92.)

Summary of Contents for im6020














































































































































































































































































































































































































































































































































Search results

Summary of Contents for im6020

Reviews:

Related manuals for im6020

Brands by name

Popular brands

imagistics im6020, User Manual

Search results

Summary of Contents for im6020

Reviews:

Related manuals for im6020

Brands by name

Popular brands