imagistics im6020 User Manual Download

Page: 269 / 525

Application Functions

im7520/im6020

8-9

plication

unctions

Chapter 8

Touch the buttons for the insert position setting.

–

To cancel changes to the settings, touch [Cancel].

–

To cancel the “Insert Image” function, touch [OFF].

Using the keypad, specify the pages where the image is to be inserted.
The inserted page is added after the specified original page.

–

Touch [Select] to enter the specified pages and display the Insert
Image screen (with the list of specified pages).

What will happen if there are more insertion pages than the number
of pages that are specified?

The remaining insertion pages are added at the end of the original.

Insert Image screen (for editing settings)

Insert Image screen (for applying settings)

Summary of Contents for im6020














































































































































































































































































































































































































































































































































Search results

Summary of Contents for im6020

Reviews:

Related manuals for im6020

Brands by name

Popular brands

imagistics im6020, User Manual

Search results

Summary of Contents for im6020

Reviews:

Related manuals for im6020

Brands by name

Popular brands