imagistics im6020, User Manual

Page: 411 / 525

Before Making Copies 2
im7520/im6020 2-15
Before Making C
opies
Chapter 2
8 [Reset] key Press to clear all settings (except programmed
settings) entered in the control panel and touch
panel.
9 [Interrupt] key Press to enter Interrupt mode.
While the machine is in Interrupt mode, the
indicator on the [Interrupt] key lights up in green
and the message “Now in Interrupt mode.” appears
on the touch panel. To cancel Interrupt mode, press
the [Interrupt] key again.
10 [Stop] key Press the [Stop] key during copying to stop the
copy operation.
11 [Start] key Press to start copying. When this machine is ready
to begin copying, the indicator on the [Start] key
lights up in green. If the indicator on the [Start] key
lights up in orange, copying cannot begin.
Press this key to continue a stopped job. (See
p. 11-2.)
12 Main Power indicator Lights up in green when the machine is turned on
13 Data indicator Flashes in green while a print job is being received
Lights up in green while a print job is queued to be
printed or while it is printing.
14 [Proof Copy] key Press to print a single sample copy to be checked
before printing a large number of copies. (See
p. 4-5.)
15 Keypad Use to type in various values, such as the number
of copies to be produced and the zoom ratio.
16 [C] (clear) key Press to erase a value (such as the number of
copies, a zoom ratio, or a size) entered using the
keypad.
17 [Mode Check] key Press to display screens showing the specified
settings.
18 [Utility/Counter] key Press to display the Utility screen and allow the
meter count to be checked.
19 [Mode Memory] key Press to register the desired copy settings as a pro-
gram or to recall a registered copy program. (See
p. 4-14.)
20 Contrast dial Use to adjust the contrast of the touch panel.
21 [Enlarge Display] key Press to enter Enlarge Display mode.
22 [Accessibility] key Press to display the screen for specifying user
accessibility functions.
23 [Help] key Press to display the Main Help Menu screen, where
descriptions of the various functions and details of
operations can be displayed. (See p. 4-17.)
No. Part Name Description