imagistics im6020 User Manual Download

Page: 184 / 525

Additional Copy Operations

4-22

im7520/im6020

Addition

al Copy Op

era

tions

Chapter 4

To display the Help screen while specifying a setting

Help can be displayed for the copy settings that are being specified.

Display the setting
screen for the desired
copy setting, and then
press the [Help] key.

–

To view detailed de-
scriptions (in the 4th
level of the Help
screens), touch [De-
tail], if it appears in
the screen.

A Help screen containing
details of the functions
and operations.

Why is there no Help information for some functions in the Help
Menu screen?

Depending on the displayed screen, there may be no Help informa-
tion for some functions.

Is there more information about the buttons of the help screens?

Refer to “Overview of Help Screens” on page 4-17.

After checking the Help information, touch [Exit] or press the [Help] key.

–

To return to the upper level Help Menu screen, touch [

] in the

Help screen displayed by selecting an item in a Function Map.

The screen that was displayed before the [Help] key was pressed ap-
pears again.

Help

Summary of Contents for im6020














































































































































































































































































































































































































































































































































Search results

Summary of Contents for im6020

Reviews:

Related manuals for im6020

Brands by name

Popular brands

imagistics im6020, User Manual

Search results

Summary of Contents for im6020

Reviews:

Related manuals for im6020

Brands by name

Popular brands