imagistics im6020, User Manual

Page: 185 / 525

Additional Copy Operations 4
im7520/im6020 4-23
Addition
al Copy Op
era
tions
Chapter 4
4.7 Specifying Control Panel Settings (Accessibility
Mode)
This section contains details on the procedures for specifying control panel
settings and adjusting the touch panel.
Displaying the Accessibility Setting Screen
% Press the [Accessibility]
key.
–
To exit the Accessi-
bility Setting screen
and return to the Ba-
sic screen, touch
[Close].
The Accessibility Setting
screen appears.
To set the “Key Repeat Start/Interval Time” function
The length of time until the setting begins to change after holding down [+]
or [-] in the Zoom screen or [Light] or [Dark] in the Density screen and the
length of time for the value to change in Enlarge Display mode can be spec-
ified.
The factory default setting for “Time To Start” is 0.8 second and the setting
for “Interval” is 0.3 second.
0 The settings specified for the “Key Repeat Start/Interval Time” function
are only applied in the Enlarge Display mode.
1
Display the Accessibility Setting screen. (To display the screen, refer to
page 4-23)
Accessibility