imagistics DL460 Operating Manual Download Page 91

Page: 91 / 227

3-55

8. Auxiliary Functions

Makin

Cop

ter

Touch [File Margin].

Load the originals.

Select the desired “Position” of the margin.

Hold down [

▼

] or [

▲

]until the desired

margin width is reached.

NOTE
Having a margin width larger than necessary
could result in part of the image missing on the
copy. Try to keep a logical margin width.

Useful Tip
You can change the margin width in 1/16
increments within the range 0 to 3/4.

Touch [Enter].

Useful Tips
• If the margin position is set to Left and width to

0, the image on both the front and back sides of
the copy has the same orientation as that on the
original.

• If the margin position is set to Top and width to

0, the image on the 2nd side of the copy is
inverted to that on the 1st side.

Using File Margin

4003P089CA

2
3

4003P390EA

4003P391EA

4002O013AB

Orig.

Copy

4002O048AB

Orig.

Copy

Summary of Contents for DL460




































































































































































































































Search results

Summary of Contents for DL460

Reviews:

Related manuals for DL460

Brands by name

Popular brands

imagistics DL460, Operating Manual

Search results

Summary of Contents for DL460

Reviews:

Related manuals for DL460

Brands by name

Popular brands