3-7
2. Placing the Original
Makin
g
Cop
ie
s
Ch
ap
ter
3
<When placing an open book or magazine>
Place the open book so that its top edge is at
the rear of the machine and the center of the
book is aligned with the Book Marker
indicated on the Original Length Scale.
Gently lower the Original Cover.
NOTES
• If the original is thick, make a copy with the
Original Cover raised open.
• Not positioning the open book properly will
result in copies with pages in incorrect order.
• Do not look directly at the Original Glass
surface as a strong beam of light is emitted.
NOTES
• Be sure to raise the Original Cover 15° or more
before placing the original. If the Original
Cover is raised to an angle less than 15°, the
machine may fail to select the correct paper
size or zoom ratio.
• Do not place an original weighing more than 6-
1/2 lb on the Original Glass.
• When placing an open book, do not press the
book hard on the Original Glass, as trouble
could result.
Making Copies from a Book Using
Book Copy Mode
1
4002O130AC
1155O697AA
Book Marker
Original Length Scale
2
4002O190AC
15°
Summary of Contents for DL460
