imagistics DL460, Operating Manual

Page: 207 / 227

6-47
8. When This Type of Copy is Produced
Wh
en
a Mes
sage
App
ear
s
Chapter 6
* Call your Technical Representative if these procedures do not correct the problem.
Symptom Possible Cause Action
The copy has lines.
The copy has dark specks or spots.
The Original Glass is dirty. Wipe the Original Glass clean
with a soft dry cloth.
☞
p. 7-10
The Original Pad is dirty. Wipe the Original Pad clean
with a soft cloth dampened with
alcohol.
☞
p. 7-10
The original is very thin or
highly transparent. Place a blank sheet of paper over
the original.
☞
p. 3-6
The original is 2-sided. The information on the back side
of a 2-sided, thin original may be
slightly reproduced on the copy.
Set the machine into the Manual
Exposure mode and, using
[Lighter], make the exposure
level lighter.
☞
p. 3-44
The edge of the copy is dirty. The Original Pad is dirty. Wipe the Original Pad clean
with a soft cloth dampened with
alcohol.
☞
p. 7-10
You have selected a paper size
larger than the original. (When
the zoom ratio is set at full size
×
1.000)
Select the same paper size as the
original.
☞
p. 3-9
Or, use Auto Size to enlarge the copy
to the appropriate size.
☞
p. 3-14
The original is not placed in the
correct position (when the zoom
ratio is set at full size
×
1.000).
Select the same paper size as the
original. Or, reload the paper in
the same direction as the
original.
☞
p. 3-9
The reduction ratio selected is
not in accord with the paper size.
(When doing manual reduction
copying.) Select the zoom ratio according
to the paper size.
☞
p. 3-14
Or, use Auto Size to reduce the copy
to the appropriate size.
☞
p. 3-14
The image on the copy is not
aligned properly
.
The original is not placed in the
correct position. Place the original correctly on
the Original Glass against the
Original Width Scale.
☞
p. 3-6
Or, load it in the Electronic
Document Handler correctly
along the Document Guide
Plates.
☞
p. 3-5
The originals may not be
suitable for use in the Electronic
Document Handler. Raise the Electronic Document
Handler and place the originals
on the Original Glass one at a
time, instead of using the
Electronic Document Handler.
☞
p. 3-5
Something is sticking to the
Original Glass. Wipe the Original Glass clean
with a soft dry cloth.
☞
p. 7-10
1139O1670A
1074O111
1074O112
1074O113