imagistics DL460, Operating Manual

Page: 65 / 227

3-29
5. Selecting the Finishing
Makin
g
Cop
ie
s
Ch
ap
ter
3
<Half-Fold>
Half-Fold folds the copy in two at its center with
the copy surface on the outside.
<For United States and Canada Users>
Sizes of paper that can be loaded: 11
×
17 L
<Except United States and Canada Users>
Sizes of paper that can be loaded: 11
×
17 L, Legal L
Width 10 to 11-3/4
Length 14-1/4 to 17
* The finished copy size has a length half that of
the paper loaded in the machine.
You can produce a document that looks like below
by combining this function with Staple and Hole
Punch.
Number of sheets : 2 to 10
NOTES
• Half-Fold cannot be used if you make a copy from an original placed directly on the Original Glass.
• Even if Staple is previously set to a corner or center position, the setting of Half-Fold automatically
cancels this setting and reselects a side stapling position.
• If the machine is loaded with paper of a standard size, Auto Size is automatically selected. If it is
loaded with paper of a non-standard size, full size (
×
1.000) is automatically selected.
Touch the desired finishing function key and
then touch [Folding].
Touch [Half-Fold].
To set Staple, touch [2-Point Staple].
To set Hole Punch, touch [Hole-Punch].
Touch [Enter].
1155O041AA
Orig.
Copy
ex.)11
×
17
→
Letter
1155O0640EA
1
4003P039CA
2
4003P042CA
3
4003P343EA
4
4003P344EA
5