Panacea Lite Routing Switcher Series
Installation, Configuration, and Operation Manual
71
Copyright © 2004-2007, 2008, 2010, Harris Corporation
Step 3: Assigning the Destinations
Each UMD must have its own Address ID. The Address ID is assigned on each UMD
from the front panel. Directions for assigning an Address ID can be found in the
Megahertz Under Monitor Display User Manual
.
Once each UMD has its own Address ID, the Destinations must be assigned to
these UMD Address IDs so that the proper UMD will monitor the proper
Destination.
1
Edit the panel again and select the
Assignment
tab.
2
At the Destination, select
Delete All
.
Figure 4-35
Delete Destinations of the LXYTOTSLUMD
3
Assign the Destinations by selecting the proper destination in logical order.
