Panacea Lite Routing Switcher Series
Installation, Configuration, and Operation Manual
171
Copyright © 2004-2007, 2008, 2010, Harris Corporation
P12×1-CP DIP
Switch Con-
figuration
DIP switch configuration mode provides limited configuration capability, which
allows you to set the panel’s Destination offset, signal type, and Levels controlled.
These selections are shown in
Figure B-7
.
Destination Offset
offset the destinations from 0 to 64 using binary code.
Level Control
determines which levels will be affected by this control panel.
The first or lowest consecutive level set on the DIP switch is assigned to the
video level and the next consecutive level is set on the DIP switch (plus all other
levels set in consecutive order) are assigned and follow the audio level, if
applicable.
Figure B-7
P12×1-CP DIP Switch Summary
