Panacea Lite Routing Switcher Series
Installation, Configuration, and Operation Manual
9
Copyright © 2004-2007, 2008, 2010, Harris Corporation
A local control panel (P12×1-CP), which is available as an option
A remote control panel (P12×1-RCP), which is available as an accessory
Figure 1-10
shows an example of the “blank” front panel available for the frame.
See
Figure 1-8
on page 8 for an example of a local control panel and
Figure 1-9
on page 8 for an example of a remote control panel.
Figure 1-10
Blank Front Panel
Operating Mode
The Panacea Lite operates in DIP switch mode for basic matrix switching on the
X-Y bus with Harris protocol.
For more information about frame DIP switch settings, see
Chapter 2
.
For more information about P12×1-SP DIP switch settings, see
Chapter 4
.
For more information about control panel DIP switch settings, see
Appendix B
.
For more information about operating the Panacea Lite routing switcher, see
Chapter 3
.
For more information about operating the P12×1-SP submodule, see
Chapter 4
.
For more information about operating local or remote control panels, see
Appendix B
.
