Chapter 4
P12×1-SP Installation, Configuration, and Operation
94
Copyright © 2004-2007, 2008, 2010, Harris Corporation
References
The following documentation used the following references for implementing the
protocol translation:
Matrix-Hub Series 1000 User Manual
, 13 July 2001, Lightwave Communications
(© 1999-2000, Lightwave Communications, Inc., 100 Washington Street, Milford
CT 06460).
Routing Switcher Serial Protocol Reference Operation and Reference Manual,
Edition D (May 2004), Leitch Technology, Chesapeake, Virginia
RS-232/RS-422
Jumper Orienta-
tion
Figure 4-49
shows the proper orientation for the RS-232 and RS-422 jumper. (See
Figure 4-6
on page 34 for an illustration of the pin 1 reference point location.)
Figure 4-49
LXYTOLIGHTWAVE RS-232/RS-422 Jumper Orientation
Table 4-17
Optional User Preference Setting
Matrix-Hub DIP
Switch Position
DIP Switch Settings
Feature Result
SW2, Poles 1-8
00000000 = 19200 baud
OR
00000010 = 9600 baud
OR
11000001 = 4800 baud
Baud rate must match
P12×1-SP
baud
SW3, Pole 1
*
0
*
*
To disable temperature alarm, set to “1.”
Display temperature in
F
*
SW3, Pole 2
1
Echo
characters ON
SW3, Pole 3
1
Send error messages
SW3, Pole 4
0
Do not add line feed to
outputs
