Chapter 2
Frame Configuration and Installation
22
Copyright © 2004-2007, 2008, 2010, Harris Corporation
4
Screw in the screw lock connections and ensure the connector is securely
fastened to the rear connector.
5
Check that the power setting is correct, and then apply power to the frame.
Figure 2-18
P12×1-DTB Wiring Diagram
1
Serial
Communications
and Control
Submodule
(P12×1-SP)
See
P12×1-SP Installation, Configuration, and Operation
on page 29 for
installation, configuration, and operation information.
1
Local Control
Panel (P12×1-CP)
See
Installing a P12×1-CP Control Panel
on page 166 for installation,
configuration, and operation information.
Remote Control
Panel
(P12×1-RCP)
See
Installing a P12×1-RCP Control Panel
on page 167 for installation,
configuration, and operation information.
1
As of July 1, 2005, the P12×1-SP and the P12×1-DTB are available as standard equipment
on the Panacea Lite. Installation information in this manual is included for customers who
purchased a Panacea Lite frame prior to July 1, 2005, and who now want to install a
P12×1-SP and/or a P12×1-DTB.
