Appendix A
Safety Precautions, Certifications, and Compliances
160
Copyright © 2004-2007, 2008, 2010, Harris Corporation
Product
Damage
Precautions
CAUTION
:
Disconnect power from the frame before removing or installing input/
output modules. Removing or installing modules with power applied
could cause serious damage to system components.
Use Proper Power Source
Do not operate this product from a power source that supplies more
than the specified voltage.
Use Proper Voltage Settings
Before applying power, ensure that the line selector is in the proper
position for the power source being used.
Provide Proper Ventilation
To prevent product overheating, provide proper ventilation.
Do Not Operate With Suspected Failures
If you suspect there is damage to this product, have it inspected by
qualified service personnel.
CAUTION:
This unit can have more than one power supply cord. To
de-energize the internal circuitry, you have to disconnect all power
cords.
ADVARSEL:
Utstyret kan ha mere ennn en tilførselsledning. For å gjore
interne deler spennigsløse må alle tilførselsledningene trekkes ut.
VARNING:
Denna apparat har mer än en nätanslutning. Samtliga
nätkablar måste bortkopplas för att göra de interna kretsarna
spänningsfria.
FUSE:
REPLACE WITH SAME TYPE AND RATING OF FUSE.
CAUTION:
REPLACE WITH SAME TYPE FUSE.
ATTENTION:
UTILISER UN FUSIBLE DE RECHANGE DE MÊME TYPE.
CAUTION:
DISCONNECT SUPPLY CORD BEFORE CHANGING FUSE.
ATTENTION:
DÉBRANCHER AVANT DE REMPLACER LE FUSIBLE.
ACHTUNG:
VOR AUSWECHSELN DER SICHERUNG IST DAS GERÄT
VOM NETZ ZU TRENNEN.
CAUTION
Disconnect power from the frame before removing or installing input/
output modules. Removing or installing modules with power applied
could cause serious damage to system components.
Use Proper Power Source
Do not operate this product from a power source that supplies more
than the specified voltage.
