Chapter 4
P12×1-SP Installation, Configuration, and Operation
92
Copyright © 2004-2007, 2008, 2010, Harris Corporation
Table 4-15
X-Y Commands
Command Syntax
(command begins with “@” sign
followed by a space)
Command Name
Result
@ Q?
Alarms Request
Requests status of all alarms in
system
@ B:C
Clear Preset Buffer
Clears all presets
@ I?A
Device Description Request
Device information description
@ I?T
Device Type Request
Device type information
@ I?V
Device Version Request
Device version information
@ X:<Lvls>/<Dest>,<Src>[:I<ID>]
Direct Crosspoint Take
Takes specified crosspoint
(specifies source, destination, and
level) without buffer execute
command
@ B:E
Execute Preset Buffer
Executes all presets
@ F?<Lvl>
Frame Size Request
Requests router size on a specific
level
@ P:<Lvl>/<Dest>,<Src>[:I<ID>]
Preset Crosspoint
Presets or preloads crosspoint
requests for execution at a later
time
@ S?<Lvls>
Request Crosspoint Status– Entire
Level
Requests crosspoint status of all
destinations on a specified level
@ X?<Lvl><Dest>
Request Crosspoint Status – Single
Destination
Requests crosspoint status of a
specific destination on a specific
level
@ P?<Lvl><Dest>
Request Preset Crosspoint Status
Verifies source that has been
preset to a given destination on a
specific level
@ V?<Lvl>
Request Preset Crosspoint Status
On Level
Verifies source that has been
preset to any destination on a
given level
@ Z:<Lvls>
Reset Levels
Simulates a reboot of the
P12×1-SP
@ B:R
Reset Preset Buffer
Resets or clears all presets
(replaced in most products with
@ B:C Clear Preset
)
