Imagine communications Selenio BNP 2xr, User Manual

Page: 125 / 278

Selenio TM BNP User Guide, Release 3.7.1 125
Grooming and PSIP
- Grooming - Mapping
Figure 73. Creating Output TS (DVB) - ASI port
Select DVB to reveal
the DVB
configuration fields.
1.
At the Create Output Transport Stream dialog, enter information to define the DVB transport
stream on the ASI port:
-
Use guidelines from Table 63 to provide ASI port information at the upper portion.
-
Use guidelines from Table 66 to provide the DVB information.
2.
Click OK to save the settings, and to put the new TS at the Outputs panel of the Mapping screen,
beneath the selected ASI port.
Table 66. DVB Output Transport Stream Configuration Parameters
Field Description
Network ID Input the Network ID of the current transport stream.
Modulation Mode Use the pull-down menu to select the modulation mode used for the TS.
Choice between
SCTE 64 QAM and SCTE 256 QAM .
Original Network ID Input the Network ID from which this stream has originated.
NIT Source Use the pull-down menu to select the source for the network information
table.
TDT/TOT Source Use the pull-down menu to select the source for the time and date table or
the time offset table.
SDT Source Source of the service description table for this transport stream. If you select
N/A then SDT is not generated for this output TS.
EIT Source Source of the Event Information Tabled (EIT) for the programs in this
transport stream. If you select N/A then EIT will not be generated.