Imagine communications Selenio 6800+, Installation And Operation Manual

Page: 17 / 54

Installation and Operation Manual
3
Copyright © 2011, Harris Corporation
Module Description
Front Module
Figure 1-1 is a generic top-front view of the module.
Figure 1-1 Front Module Card Edge Features
Table 1-1 Front Module Card Edge Features
Feature Description
1 Module Status
LED Indicates the module’s state of operation.
„
Off - The module is powered OFF. The module is not operational.
„
Green - The module is powered ON. The module is operating properly.
„
Red - The module is either booting or experiencing an error.
„
Red (blinking) - The module has booted in ‘safe mode’. See ‘Toggle Switch’
description below.
„
Amber - The module is booting.
2 Ethernet Toggle
Switch This three-position toggle switch controls the card’s IP address configuration.
„
Up (after boot) - Forces the IP address for HTTP and Telnet configuration and
control to 192.168.1.1
„
Up (during boot) - Forces the module into ‘safe mode’.
See Firmware Upgrade for details.
„
Center - The module operates using the configured IP address.
„
Down - Disables HTTP and Telnet access.