Imagine communications Selenio 6800+, Installation And Operation Manual

Page: 42 / 54

Chapter 5
Command Parameters
28
Copyright © 2011, Harris Corporation
Alarms
Carrier Lock Indicates if carrier lock has been achieved on the
selected RF interface. True, False
—
FEC Lock Indicates if FEC lock has been achieved on the
incoming input signal. True, False
—
BER Indicates the Bit Error Rate. 1e-6 to 1e-14
—
EbNo (dB) Indicates the EbNo level. 0.0 to 30.0 dB
—
RX Level (dB) -70 to -0
—
Status > ASI
LOS Indicates a Loss of Signal on the ASI input
interface. True, False
Standard Indicates the standard of the incoming ASI
stream. ASI-188, ASI-204,
unknown
—
8b10b Errors Provides a count of ASI 8b10b errors. Counter
—
Sync Errors Provides a count of ASI sync errors. Counter
—
Status > Ethernet
Link Indicates the state of the Ethernet's physical
connection. lost, negotiating,
10h,10f, 100h,
100f, 100
—
RX Packets Indicates the number of packets received in the
last second. Counter
—
TX Packets Indicates the number of packets transmitted in
the last second. Counter
—
RX Error Packets (Available in a future release)
Indicates the number of errored packets received
in the last second. Counter
—
MAC Address Displays the Ethernet MAC address. MAC Address
—
Status > Sys
Software Version Firmware revision number. #.#.#
—
Hardware Version Indicates the hardware revision number. 1 to 32
—
Manufacturing Date Indicates the module’s manufacturing date. yyyy-mm-dd
—
Serial Number Indicates the module’s serial number. String
—
Command Path Description Options Default
Alarms
RF Loss of Signal This alarm indicates a loss of signal on the RF
interface. True, False
—
ASI Loss of Signal This alarm indicates a loss of signal on the ASI
interface. True, False
—
Table 5-2 Status Parameters
Command Path Description Options Default