21
Copyright © 2011, Harris Corporation
5
Command Parameters
Overview
Parameters
on page 23 lists all parameters and options for the . Use control
software such as CCS Navigator to access these parameters or use the 6800+ Web GUI. See
the respective software user manual for more information on usage. In Table 5-1 on
page 23, each branch of the parameter tree is separated by a ‘greater than’ sign ‘>’.
When using the serial port command line interface or telnet, use a slash "/" as a separator
instead of ">", and include a separator before the parameter name.
Commands are arranged into three groups:
Configuration Commands
Use these commands to set module parameters.
Configuration > RF[1–4]
on page 23
Configuration > BISS
on page 24
Configuration > Dmx
on page 25
Configuration > Network
on page 26
Configuration > Control
on page 27
Status Commands
Use these commands to verify almost any parameter.
Status > Dmx
on page 27
Status > RF [1–4]
on page 27
Status > Ethernet
on page 28
Status > Sys
on page 28
Alarm Commands
Use the commands in this section to monitor alarm states.
Alarms
on page 28
Summary of Contents for Selenio 6800+
