Imagine communications Selenio 6800+, Installation And Operation Manual

Page: 39 / 54

Installation and Operation Manual
25
Copyright © 2011, Harris Corporation
Injected Identifier Specifies the Basic Interoperable Scrambling
System (BISS) Injected Identifier.
When no BISS Mode E descrambling is desired,
this value may be an empty string. To enable BISS
Mode E descrambling, this identifier should be
set to a 14-character, hexadecimal string, such as
0a3b5c7d9e1f34 (upper-case and lower-case
letters allowed). The identifier, combined with
the encrypted session word, lets the decoder
derive the clear session word.
The decoder protects its injected identifier.
Although the value may be written, attempts to
read the value receive the 14-character string
**************.
14-char (hex)
—
Enable Enables BISS Enable, Disable
Disable
Configuration > Dmx
Input Specifies the active input interface. ASI, RF
ASI
RF Select Specifies the RF interface from which to derive
input. 1 to 4 1
Program Number Specifies the MPEG program to decode. When
set to non-zero, this parameter is affected by the
Output parameter.
„
-64 to -1
Negative number specifies which PAT entry
to use (-1 means the first, -2 the second,
etc.).
„
0
Specifies no program should be selected.
„
1 to 65535
Specifies the program number to process.
The demultiplexer reads the PAT, looking for
a PAT entry that contains the specified
program number, and then decodes that
program.
Also see the Output parameter.
-64 to 65535 -1
Table 5-1 Configuration Parameters
Command Path Description Options Default