C O M M A N D R E F E R E N C E
Command Reference
04_09
LDC-3700C Series
129
C H A P T E R
4
The TEC:SET:T? query returns the TEC constant temperature set point value, in
C.
Notes
The TEC output is controlled to this set point value only when constant T mode is in
effect.
Examples
"TEC:SET:T?" -response: 33.4, means the constant T set point is 33.4
C.
"Tec:Set:t?" -response: -4.0, means the constant T set point is -4.0
C.
The TEC:T command sets the TEC's constant temperature set point.
Parameters
An <nrf value> which represents the TEC temperature, in
C.
Notes
The TEC temperature is controlled to this set point only when the TEC is operated in T
mode. If the a maximum temperature limit is set (see TEC:LIMit:THI on page 124), this
limit becomes the maximum set point value as well.
Examples
"Tec:T 20" -action: sets the TEC temperature set point to 20.0
C.
"TEC:MODE:T; TEC:T 25.3" -action: sets the TEC temperature set point to 25.3
C. The
output is controlled to this value, if the output is on.
The TEC:T? query returns the value of the TEC temperature measurement.
Notes
The measured TEC temperature is valid for all modes of TEC operation. Temperature is
continually updated.
This measurement is updated approximately once every 600 msec.
The response value has 6 digits of precision.
Examples
"TEC:T?" -response: 10.4231, means the measured TEC load temperature is
10.4231
C.
"Tec:Mode:R; Tec:T?" -response: -3.0778, means the measured TEC load temperature
is -3.07780
C.
TEC:SET:T?
C
OMMON
D
EVICE
D
EPENDENT
F
RONT
P
ANEL
TEC:T
C
OMMON
D
EVICE
D
EPENDENT
F
RONT
P
ANEL
TEC:T?
C
OMMON
D
EVICE
D
EPENDENT
F
RONT
P
ANEL
Summary of Contents for LDC-3700C Series
