C O M M A N D R E F E R E N C E
Command Reference
04_09
LDC-3700C Series
115
C H A P T E R
4
The TEC:DISplay:SET? query returns the status of the TEC display set point switch.
Notes
The set point display will not time out when remote operation is used. (It will be
continuously displayed.)
In local operation, the status of the (TEC DISPLAY) SET switch is determined by visually
inspecting the LED indicator on the switch (lit = ON).
Examples
"TEC:DISPL:SET?" -response: 0, means the set point value is disabled for the TEC
display.
"Tec:Dis:Set?" -response: 1, means the set point value is enabled for the TEC display.
The TEC:DISplay:T command enables the TEC display to show the TEC load
temperature measurement.
Parameters
None.
Notes
The actual TEC T display is turned off automatically when another TEC display selection
is enabled.
Examples
"Tec:Dis:T" -action: enables the TEC display for the TEC load's measured temperature.
"TEC:DIS:T" -action: enables the TEC display for the TEC load's measured
temperature.
The TEC:DISplay:T? query returns the status of the (TEC DISPLAY) T switch.
Notes
The response will be the status of the TEC DIS T switch, 1 = on, 0 = off.
Examples
"TEC:Dis:T?" -response: 0, means that the TEC DIS T switch is not enabled, TEC load
temperature is not displayed.
"Tec:dis:T?" -response: 1, means that the TEC DIS T switch is enabled, temperature
may be displayed.
TEC:DISplay:SET?
C
OMMON
D
EVICE
D
EPENDENT
F
RONT
P
ANEL
TEC:DISplay:T
C
OMMON
D
EVICE
D
EPENDENT
F
RONT
P
ANEL
TEC:DISplay:T?
C
OMMON
D
EVICE
D
EPENDENT
F
RONT
P
ANEL
Summary of Contents for LDC-3700C Series
