C O M M A N D R E F E R E N C E
Command Reference
04_09
LDC-3700C Series
113
C H A P T E R
4
The TEC:DISplay:ITE command enables the TEC display to show the TE current
measurement.
Parameters
None.
Notes
The actual TEC ITE display is turned off automatically when another TEC display
selection is enabled.
Examples
":Tec:Display:Ite" -action: enables the TEC display for measured current values.
"TEC:DIS:ITE" -action: enables the TEC display for measured current values.
The TEC:DISplay:ITE? query returns the status of the (TEC DISPLAY) ITE switch.
Notes
The response will be the status of the TEC DIS ITE switch; 1 = on, 0 = off.
Examples
"TEC:DIS:ITE?" -response: " 0", means that the TEC DIS ITE switch is not enabled,
TEC output current is not displayed.
"Tec:DISp:Ite?" -response: "1", means that the TEC DIS ITE switch is enabled, TEC
current may be displayed.
The TEC:DISplay:PARAM command enables the TEC display to show the parameter
values.
Parameters
None.
Notes
This command has the same effect as pressing the (PARAMETER) SELECT switch
while in TEC mode. The selected parameter will be displayed for three seconds. The
actual TEC PARAM display is turned off automatically when a TEC display selection is
enabled.
Each time the command is issued, the next TEC parameter will be selected, see Section
2.9.
Examples
":Tec:Display:Param" -action: selects a TEC parameter and displays its value.
"TEC:DIS:PARAM" -action: selects a TEC parameter and displays its value.
TEC:DISplay:ITE
C
OMMON
D
EVICE
D
EPENDENT
F
RONT
P
ANEL
TEC:DISplay:ITE?
C
OMMON
D
EVICE
D
EPENDENT
F
RONT
P
ANEL
TEC:DISplay:PARAM
C
OMMON
D
EVICE
D
EPENDENT
F
RONT
P
ANEL
Summary of Contents for LDC-3700C Series
