Ikegami Editcam 3 DNS-33W, Operation Manual

Page: 27 / 160

DNS-33W 0503 VOL1 (E) DNS-33W
QUICK START GUIDE 15
[When Recording is Stopped]
Displays only time code.
[During Playback]
Displays remaining time of the clip in seconds on the right of
the time code.
[When Playback is Stopped]
Displays position mark on the right of the time code. Position
mark is a mark showing where the selected frame is located
in the clip such as current position and setting status of IN/
OUT points. Description of each mark is shown below.
Mark Description
= Start-point: first frame of the clip
> Start-point of the clip IN point has been set
>> Frame between IN point and start-point
>= Frame IN point has been set
== Frame in the middle of the clip
=< Frame OUT point has been set
<< Frame between OUT point and end-point
= End-point: last frame of the clip
< End-point of the clip OUT point has been set
>< Frame both IN/OUT points have been set
12. Bin name
Displays the bin name.
13. Audio level indicator
Displays the audio input signal level.
14. Software version
Displays system software version of the recorder section.
1
0
2 3 4
DV25 PAL 48k
DVCPRO AIF
LOCAL
BIN FAG7CM 1M NLT 1 .0 .9
POWER 15.0V
FP1 02
：
43
：
49
FAT32
VID=CAMERA
READY
0001/0002
0003
00 : 02 : 06 : 14
Only time code is displayed.
1
0
2 3 4
DV25 PAL 48k
DVCPRO AIF
LOCAL
BIN FAG7CM 1M NLT 1 .0 .9
POWER 13.1V
FP1 02
： 45 ： 36
FAT32
VID=DISK
PLAYING
0001/0002
0001 0000 1 0 : 10 A 1234
00 : 01 : 02 : - - 0 : 05
Time Code Remaining Time of
the Clip (seconds)
1
0
2 3 4
DV25 PAL 48k
DVCPRO AIF
LOCAL
BIN FAG7CM 1M NLT 1 .0 .9
POWER 13.1V
FP1 02
：
45
：
36
FAT32
VID=DISK
READY
0001/0002
0001 00002 0 : 10 A 1234
00 : 01 : 12 : 17 = =
Time Code Position Mark