Ikegami Editcam 3 DNS-33W, Operation Manual

Page: 132 / 160

DNS-33W DNS-33W 0503 VOL1 (E)
7 - 2 7. TROUBLE SHOOTING AND MAINTENANCE
■
How to Take out FieldPak on Emergency
When FP2 cannot be ejected even if the EJECT key on the
upper part of the camera is pressed, it can be taken out
forcibly by inserting a slotted screwdriver to the
EMERGENCY EJECT hole on the left side of the camera.
1. Turn OFF the power of the camera.
2. Insert a slotted screwdriver etc. to the EMERGENCY
EJECT hole and push down the clasp inside.
The EJECT cover opens. Take out the FP2.
7.2 Maintenance
This section explains the maintenance for DNS-33W.
7.2.1 Inspecting the Camera
Before shooting, carry out the following inspection to check
that the camera is operating properly. It is recommended that
a color monitor be used to check the images during the
inspection.
■
Checking the Positions of the Switches
Before turning the POWER switch ON, check that the
following switches, knobs, etc. are set to the specified
positions.
[Lens]
A
SERVO
x1
IRIS OPERATION SELECT switch
ZOOM OPERATION SELECT switch
EXTENDER SELECT lever
Switch Position
AI
M
IRIS
T
RET
W
Z O O
M
MANU SERVO
Z O
O
M
IRIS OPERATION SELECT Switch
EXTENDER SELECT Lever
ZOOM OPERATION SELECT Switch
[Camera Right Side]
1
L
A or B
BARS
STBY
OFF
ND FILTER knob
GAIN SELECT switch
AWB SELECT switch
OUTPUT SELECT switch
FIELDPAK switch
P.FUNC switch
Switch Position
TCG
PANEL
LIGHT
DNS-
33W
POWER
VF
CHARA
AUDIO
FIELDPAK GAIN OUTPUT AWB
STBY
SAVE
・ L
・ M
・ H
CAM
BARS
・
A
・ B
OFF
POWER
VF
CHARA
Camera Right Side
ND FILTER Knob
POWER Switch
AWB SELECT Switch
OUTPUT SELECT Switch
GAIN SELECT Switch
FIELDPAK
Switch
P.FUNC Switch