Ikegami Editcam 3 DNS-33W, Operation Manual

Page: 121 / 160

DNS-33W 0503 VOL1 (E) DNS-33W
6. SETTINGS AND ADJUSTMENT OF RECORDER SECTION 6 - 5
6.3 DISK OPERATIONS Menu
Pressing the "DSK" button on the "BASE" menu displays
"DISK OPERATIONS" menu.
FMT
BIN
MED
MEDIA
TOOLS EDIT
TOOLS
SET UP
ED
DISK
SETTINGS
＞ FP1 RDY 40g 39g
DISKS
5
6
1
2
3
4
1 FMT
Initializes an FP2.
2 BIN
Moves to the "BIN" menu.
3 MEDIA TOOLS
Moves to the "MEDIA TOOLS" menu.
4 DISK SETTINGS
Moves to the "DISK SETTINGS" menu.
5 EDIT TOOLS
Moves to the "EDIT TOOLS" menu.
6 UP
Returns to the "BASE" menu.
6.3.1 FMT Menu
[Normal Initialization]
Initializes an FP2 into the recording format of the camera.
Pressing the "FMT" button displays the following
confirmation screen.
OK
FORMAT DISK PAK 1
CLR
Pressing the "OK" button while pressing the SHIFT key starts
initialization by the compression type selected in the
"PROJECT" menu. When the initialization is completed, the
screen switches to "DISK OPERATIONS" menu, and total
disk space and remaining disk space of an FP2 will be
displayed next to the "FMT" button. Normally initialized FP2
can be used by only this camera and the supported
equipment.
[Complete Erasure of Data]
Completely deletes data stored in an FP2.
Pressing the "FMT" button while pressing the SHIFT key
displays the following confirmation screen.
OK
WIPE DISK PAK 1
CLR
Pressing the "OK" button while pressing the SHIFT key
deletes data stored in the FP2, and the FP2 remains
unformatted.
It takes about 40 minutes for a 40GB FP2 to complete the
WIPE operation.
To use the FP2 that the WIPE operation is performed,
initialize it normally.