Ikegami Editcam 3 DNS-33W, Operation Manual

Page: 21 / 160

DNS-33W 0503 VOL1 (E) DNS-33W
QUICK START GUIDE 9
4. By pressing the "RETROLOOP LENGTH" button, characters
are highlighted. Set the retro loop time length by pressing
keys (<, >, |<<, >>|, <<<, >>>) on the control panel switch.
After the completion of the input, press the "RETROLOOP
LENGTH" button again to confirm the input number.
The retro loop time length to be specified varies according to
the compression type. Set the time length by referring to the
table below.
Compression Ratio Available Time Length to be Set
DV25 5 sec. to 8 min. 10 sec.
DV50/JFIF3:1/MPEG50 5 sec. to 4 min.
JFIF10:1 5 sec. to 9 min. 45 sec.
JFIF20:1 5 sec. to 19 min. 40 sec.
Press the "R/P" button.
A/V
AUDIO / VIDEO
DSK
DISK OPERATIONS
R/P
RECORD / PLAYBACK
SYS UP
SYSTEM SETUP
A/V
RETROLOOP LENGTH :
0 : 15 mss
DSK
TIMELAPSE RECORD :
00 :00 :00 :01
R/P
TIMELAPSE OUT OF :
00 :00 :00 :04
UP
By pressing the "RETROLOOP LENGTH"
button, characters are highlighted. Set the
retro loop time length by operating the
control switch panel.
CH1
F
R
W
CH2
F
R
W
CH3 CH4
REAR
FRONT
F
R
W
AUTO
MAN
SHIFT
IN
OUT
PLAY STOP
<<<
＜
|<< >>|
＞
>>>
CH3/4
CH1/2
OUTPUT
WIRELESS
REC
Changes the value by 1 second.
Changes the value by 10
seconds.
Changes the value by 1
minute. (When pressed
while SHIFT key is
pressed, changes the
value by 1 hour.)
Time Lapse Recording
Time lapse recording is an intermittent shoot function.
Pressing SHIFT+REC keys on the control switch panel on the right side of the camera starts recording.
FieldPak access indicator lights when image is recorded.
Record interval is set by values of "TIMELAPSE RECORD" and "TIMELAPSE OUT OF" items. Set the
values for both items between 1 frame and 23 hours 59 minutes 59 seconds 24 frames. Following formula
shows the relationship between record interval and "TIMELAPSE RECORD"/"TIMELAPSE OUT OF".
Record interval =
[How to Set the Time Lapse]
How to set the time lapse is explained here using an example of the intermittent shoot whose image
recorded for 6 seconds will be played at 15 frames.
1. Touch the Status screen to display the "BASE" menu.
2. Press the "R/P" (RECORD/PLAYBACK) button on the
screen.
[TIMELAPSE OUT OF]
[TIMELAPSE RECORD]