Ikegami Editcam 3 DNS-33W, Operation Manual, Page: 17 / 160

DNS-33W 0503 VOL1 (E) DNS-33W
QUICK START GUIDE 5
Shooting
Pressing the REC button starts recording. Pressing the REC button once again stops recording.
REC Button
There are 2 REC buttons on the camera
body, and there is a VTR button on the
lens. The VTR button on the lens works
the same as the REC button. Recording
starts/stops by pressing these buttons.
Pressing the REC key on the right side
of the camera also starts recording.
Pressing the STOP key stops recording.
CH1
F
R
W
CH2
F
R
W
CH3 CH4
REAR
FRONT F
R
W
AUTO
MAN
SHIFT
IN
OUT
PLAY STOP
＜
|<<
＞
CH3/4
CH1/2
OUTPUT
WIRELESS
REC
REC Key
STOP Key
>>|
<<< >>>
[When Recording External Input Video]
When an external VIDEO output line is connected to the camera, pressing the REC key can record the
external input video to an FP2.
1. Connect the external VIDEO output line to the GENLOCK IN connector of the camera.
2. Select the "A/V" (AUDIO/VIDEO) button on the "BASE" menu of the recorder section, and set
"SWITCHER" to "EXTERNAL".
3. Press the REC key on the right side of the camera.
Recording will be started.
4. Press the STOP key to stop the recording.
Notice
• When the REC button is pressed, the input to the recorder section changes to video signal from the
camera, and a clip (image and audio data) will be recorded to the FP2.
• Pressing the REC button during playback of a clip in the FP2 does not overwrite the image in the
clip. Playback will be discontinued, and recorded image and audio data will be saved as a new clip.
• The recording function of the external input video is optional.