Ikegami BS-98 Operation Manual Download Page 89

Page: 89 / 118

BS-98 1409 VER1 (U) (E)

5.1 Settings from the BS Menu

Setting Item

Set Value

Description

SD V PHASE

0 to 524 or
0 to 624

It adjusts the vertical phase of SDTV output signal to the external synchronization.

SD MASTER H PHASE

-429 to 429

It adjusts the horizontal master phase of SDTV output signal to the external synchronization.

SD OUT-3 H PHASE

-428 to 429

It adjusts the horizontal phase of SDTV OUT-3 output signal to the external synchronization.

SD SC PHASE COARSE -100 to 100

It coarse adjustment the subcarrier phase of SDTV output signal to the external
synchronization.

SD SC PHASE FINE

-100 to 100

It coarse adjustment the subcarrier phase of SDTV output signal to the external
synchronization.

SD ENC H PHASE

-428 to 429

It adjusts the horizontal phase of SDTV ENC output signal to the external synchronization.

SD PM H PHASE

-428 to 429

It adjusts the horizontal phase of SDTV PM output signal to the external synchronization.

SYNC OUT H PHASE

Changes
depending on
the FORMAT.

It adjusts the horizontal phase of the external synchronization output (SYNC OUT).

SYNC OUT V PHASE

Changes
depending on
the FORMAT.

It adjusts the vertical phase of the external synchronization output (SYNC OUT).

・

SDTV output is optional. When an optional is not mounted, the phase adjusting item of SDTV displays "---", and selecting

becomes disabled.

Summary of Contents for BS-98























































































































Search results

Summary of Contents for BS-98

Reviews:

Ikegami BS-98, Operation Manual, Page: 89 / 118

Search results

Summary of Contents for BS-98

Reviews: