Ikegami BS-98, Operation Manual, Page: 35 / 118

21
BS-98 1409 VER1 (U) (E)
2.2 BS-98 Rear View
Modules on the Rear of the BS-98
Modules on the rear are also of slot type and can be removed/inserted as well as the modules on the front.
④ VOUT
module ③ HOUT
module ② RET̲IN
module ① MPU&REF
module
①
MPU&REF Module
1. REF connector
It inputs the reference signal (HDTV PS/S or SDTV VBS/BBS) from the external source. It is also
possible to input the signals, of which the 10
fi eld ID signal conformable to SMPTE318M is added,
to VBS/BBS.
Bridge connection is possible.
2. Ethernet RJ45 (8P8C) connector
This is a connector to be used for connecting with the system corresponding to Ethernet.
3. ARCNET connector
This is a connector for ARCNET. It is connected to CP HUB (option) by the coaxial cable.
Refer to the Instruction manual of CP HUB to be used for details.
CAUTION:
- Use the F-head type conversion plug for connection. In addition, use 75 Ω type coaxial cables and
terminators.
- When the connector contacts the housing, failures may be caused. Pay close attention when
handling.
- When using the F-head type conversion plug, cover with an insulation cover or other item.
4. OCP/CCP connector
Connect with CP cable and OCP.
5. CSU/CCP connector
Connect with CP cable and CSU.
1
2
3
4
5