Ikegami BS-98, Operation Manual

Page: 105 / 118

91
BS-98 1409 VER1 (U) (E)
6.1 Indicator on the Front of BS Lights
6.1 Indicator on the Front of BS Lights
The LED indicator on the front of the BS lights when the BS becomes abnormal. Take the following actions since the cause varies
depending on the indicator lit.
TEMP indicator
FAN ALARM indicator
(CABLE) SHORT indicator
(CABLE) OPEN indicator
OPTICAL LEVEL indicator
■
When the OPTICAL LEVEL indicator lights
Indicators next to "HEAD" indicate the reception status on the camera head side, and indicators next to "BS" indicate the reception
status on the BS side.
Cause Action
The optical connector must be dirty.
The lighting state of the OPTICAL LEVEL indicator changes. Clean the optical connector end of the cable or the equipment side.
■
When the (CABLE) OPEN indicator lights
Cause Action
The (CABLE) OPEN indicator lights when the camera cable is not
connected or there is an open. Check if the camera cable is properly connected or there is no open.
If there is an open, replace the camera cable with a new one.
■
When the (CABLE) SHORT indicator lights
Cause Action
The (CABLE) SHORT indicator lights when a short circuit occurs in
the camera cable or a short circuit occurs in the optical connector
due to a cause such as water. Check if a short circuit occurs in the camera cable or the optical
connector is dry.
If the optical connector is wet, dry it and then clean it.
■
When the FAN ALARM indicator lights
Cause Action
FAN ALARM indicator will light when the fan is in internal BS has
stopped. Check if the fans are normal.
If any of the fans is abnormal or the lifetime of the fan expires, replace
it with a new one.
■
When the TEMP indicator lights
Cause Action
The TEMP indicator lights when the BS internal temperature is
abnormally high. When this indicator lights on, check that the ventilation hole on the
front panel and the exhaust hole on the rear panel are not covered or
clogged with dust. Avoid a place with direct sunlight.
CAUTION:
If you disregard TEMP warning and temperature rises, it must be system reboot compulsorily due to device protection.