Ikegami BS-98, Operation Manual, Page: 69 / 118

55
BS-98 1409 VER1 (U) (E)
5.1 Settings from the BS Menu
5.1 Settings from the BS Menu
The menu operation on setting the CCU/BS is performed from the controlpanel or CCU/BS by itself.
The setting of each item is performed by displaying the main menu/submenu screen on the PM screen. CCU/BS menu is displayed
only PM OUT output.
Note:
Abbreviations
PM : Abbreviation of Picture Monitor
PM screen : Means the PM OUT output screen of CCU/BS. On the PM screen, various characters are superimposed.
Basic Operation of the Menu (Operation from the MCP)
REF SAVE LOAD
JOB
START MAN SET
SCENE
M . CARD
ENABLE
SNAP
SHOT FILE
CLR
DIAGNOS EFFECT
SCREEN
16 : 9
BARS button
Special Function part
SPECIAL button
MASTER PEDESTAL
control knob
CALL button
IRIS control knob
SPECIAL button/BARS button
: Pressing the SPECIAL button then pressing the BARS button will switch to the
menu mode and display the menu.
CALL button
:
Pressed to con fi rm the selection and setting.
MASTER PEDESTAL control knob/IRIS
control knob
: Used to select a setting item.
■
Displaying the Main Menu
This section explains how to display the main menu on the PM screen.
1
Press the SPECIAL button on the MCP.
2
Press the BARS button.
The main menu appears on the PM screen.
Note:
The fl ashing item on the main menu indicates the currently focused item. This fl ashing status is called the " fl ashing cursor" hereafter
(displayed in gray in the screen example).
▲
ＢＡＲＳ ＴＩＴＬＥ
ＰＲＥＳＥＴ ＦＩＬＥ ＬＯＡＤ
ＨＥＡＤ ＭＥＮＵ
ＩＮＦＯＲＭＡＴＩＯＮ
▼
＊＊＊ ＭＥＮＵ ＊＊＊