Ikegami BS-98, Operation Manual, Page: 27 / 118

13
BS-98 1409 VER1 (U) (E)
2.1 BS-98 Front View
2.1 BS-98 Front View
This section explains the names and functions of the parts on the front of the BS-98.
BS-98 front display and operation unit
① ID display
② TALLY indicators
③ INCOM COMMON/
PRIVATE switch
⑤ INCOM PHONE knob
④ INCOM MIC switch
⑥ INCOM
HEADSET connector
⑪ BS MAIN POWER
indicator
⑫ HEAD POWER
indicator
⑦ GENLOCK indicator
⑧ TEMP indicator
⑨ FAN indicator
⑩ CABLE & OPTICALLEVEL
indicators
⑬ EMG/PM switch
⑭ CALL switch
⑮ MENU switch
⑯ MENU control switch
⑰ BS MAIN POWER switch
① ID display
ARCNET ID or the camera program number is displayed.
It can be set with "FUNCTION SETTING" item on ENGINEER (2/2) page of the BS menu.
- For ARCNET ID, a set value of 1 to 255 (decimal number ) is displayed in a hexadecimal number.
- For CAM PGM No., a set value of 1 to 99 is displayed.
② TALLY indicators
Indicators for Red TALLY, Green TALLY and Yellow TALLY.
R TALLY : Lights when the R TALLY signal is input to the TALLY IN connector on the rear of the BS. It also lights while the
CALL switch on the camera head or on any control panel (such as OCP, MCP, and RCP) is pressed.
G TALLY : Lights when the G TALLY signal is input to the TALLY IN connector on the rear of the BS.
Y TALLY : Lights when the Y TALLY signal is input to the TALLY IN connector on the rear of the BS.
③ INCOM COMMON/PRIVATE switch
Selects the intercom conversation mode.
COMM : Conversation among the camera head, BS, and system is enabled.
PRV : Conversation between the camera head and BS is enabled.
④ INCOM MIC switch
Selects ON/OFF/PTT for the intercom headset microphone.
ON : Turns ON the intercom microphone.
OFF : Turns OFF the intercom microphone.
PTT : Turns ON the intercom microphone while this switch is pressed down. (Press To Talk)
⑤ INCOM PHONE knob
Controls the volume of the intercom receiver.
⑥ INCOM HEADSET connector
Connects the intercom headset. The connector type varies according to the regional and speci fi cations.