Ikegami BS-98, Operation Manual, Page: 21 / 118

7
BS-98 1409 VER1 (U) (E)
1.2 Specifications
■
Output Signals
Item Rating
HDTV signal
Select from 3G-SDI/DUAL-LINK/HD-SDI
(SMPTE 425M, SMPTE 372M, SMPTE292M standard)
3 channels 6 outputs
*1
75 Ω output
SD-SDI signal
*2 SD-SDI 1 channel 2 outputs 75 Ω output
(SMPTE259M standard)
Synchronization signal
HDTV/SDTV selection 1 channel 75 Ω output
HDTV tri-level sync 0.6 Vp-p
SDTV 2 Vp-p
Composite signal
*2 VBS (ENC) 1 channel 2 outputs 1 Vp-p 75 Ω output
Picture monitor (PM) signal
Select from HD-SDI/SD-SDI
2 channels
*3
75 Ω output
Waveform monitor (WFM)
signal
*4
Select from HD-SDI/SD-SDI
1 channel 75
Ω output
Intercom signal
(ENG/PROD) 2 lines
Select from 4-wire/Clearcom/RTS
4-wire 2 channels 600
Ω
Clearcom 2 channels 200 Ω
RTS 2 channels 200 Ω
MIC signal (Audio)
+4dBs or 0dBs 2 channels (Analog)
-18dBFS or -20dBFS 2 channels (AES / EBU)
Tally signal (PM TALLY)
Red / Green / Yellow 3channel
*1: Two channels are selectable from 3G-SDI/HD-SDI (HOUT module). One channel is selectable from 3G-SDI/HD-SDI/SD-SDI
(VOUT module).
*2: The signal is output only when the SDTV Option is implemented.
*3: One channel can be selected from PM/WFM.
*4: WFM output can be selected with PM-2. When WFM is set, the SDI output becomes the same one as OUT-3 output.
■
Camera Cable
Item Rating
Standard cable
2SM-9.2-37.5
Cable for studio shooting
2SM-16-37.5
Cable configuration
2 single-mode silica glass fi ber optic cables
(HEAD -> CCU/BS, CCU/BS -> HEAD one cable for each)
4 power cables (One cable has 37.5
Ω /km.)
2 control cables (One cable has 113
Ω
/km.)