Ikegami BS-98 Operation Manual Download Page 102

Page: 102 / 118

BS-98 1409 VER1 (U) (E)

5.2 Settings Using Switches on the Module

PGM Settings

It sets the PGM (program audio) signal and audio trunk signal to be input to CCU/BS.
Generally, the setting is executed from the CCU/BS menu, so the setting by using the following module switches is not necessary.

S8 S9 S10 S11

IO Module

S8-S11 4dB UP

OFF

S8 PGM-1 4dB

S9 PGM-2 4dB UP

S10

PGM-3 4dB UP

S11

TRUNK 4dB UP

Switch No.

Function Name

Setting

Description

PGM-1 4dB UP

OFF

To the input of PGM-1 line, +4 dB UP OFF.

To the input of PGM-1 line, +4 dB UP ON.

PGM-2 4dB UP

OFF

To the input of PGM-2 line, +4 dB UP OFF.

To the input of PGM-2 line, +4 dB UP ON.

S10

PGM-3 4dB UP

OFF

To the input of PGM-3 line, +4 dB UP OFF.

To the input of PGM-3 line, +4 dB UP ON.

S11

TRUNK 4dB UP

OFF

To the input of TRUNK line, +4 dB UP OFF.

To the input of TRUNK line, +4 dB UP ON.

Summary of Contents for BS-98























































































































Search results

Summary of Contents for BS-98

Reviews:

Ikegami BS-98, Operation Manual, Page: 102 / 118

Search results

Summary of Contents for BS-98

Reviews: